ITOX Announces Mini-ITX With Intel® AtomTM Processor N450 –Fanless 12VDC SBC Supports Four Independent Displays

EAST BRUNSWICK, NJ – June 14, 2010 – ITOX, a leading provider of embedded x86 products and the United States affiliate of DFI-ACP, today launches a new mini-ITX form factor SBC, LR101-B16M offering low power consumption, higher-performance, and passive cooling. This embedded board utilizes the latest two-chip Intel® AtomTM processor N450 and Intel® ICH8M I/O Controller Hub system solution with 7.9 Watt TDP. The smaller integrated packaging uses 40% less board space, and provides higher performance per watt than any previous Intel® Atom™ platform.

The LR101-B16M mini-ITX SBC is equipped with a 45 nm Hi-K technology Intel® AtomTM processor N450 featuring 1.66GHz core frequency, 667MHz front side bus (FSB) and 512KB L2 cache memory. Integrating the memory controller and graphics core in the processor package eliminates the need for both Northbridge and Southbridge interface chips used in previous platforms. This creates a tightly coupled system architecture, providing higher performance and lower power than previous three-chip platform solutions In addition, a single 12VDC power input reduces power supply cost and complexity for both stationary AC powered applications and mobile battery powered applications.

The integrated Intel® Gen 3.5 graphics processor incorporates VGA and LVDS display interfaces, with resolution of 1400 x 1050 and 1366 x 768 respectively. An onboard S3 Graphics Chrome® 435 ULP accelerator with dedicated 256MB GDDR3 memory provides two DVI, one HDMI and two additional VGA display ports. The DVI and HDMI display ports are capable of supporting displays with resolution up to 2560 x1600, including dual independent 1080p video streams. Support is provided for up to 2GB of DDR2 667 MHz SODIMM system memory along with a PCI Express Gigabit LAN controller. The LR101-B16M also provides three Serial ATA ports with speed up to 3Gb/s, ten USB 2.0/1.1 ports, two Serial COM ports, one CompactFlash socket and High-Definition audio support with S/PDIF input/output interface. This embedded Mini-ITX SBC provides expansion using 1 PCI Express x1 slot for networking and RAID cards, and 1 PCI slot to support legacy card functions.

This low-power 12VDC SBC featuring four independent display support is ideal for applications requiring a stable revision-controlled platform, such as digital signage, gaming, industrial control automation, POS and Kiosk, and medical equipment embedded applications.

LR101-B16M Features:

  • Mini-ITX form factor
  • Intel® AtomTM processor N450
  • Intel® ICH8M I/O Controller
  • Fanless passive cooling
  • Single 12VDC power Input
  • Up to 2GB of DDR2 667 MHz SODIMM memory
  • Integrated Intel® Gen 3.5 Graphics Accelerator
  • S3 Graphics Chrome® 435 ULP Graphics Processor
  • VGA display port
  • HDMI display port
  • 2 DVI-I display ports (1 shared with HDMI port)
  • LVDS display interface
  • PCI Express Gigabit Ethernet LAN controller
  • PCI Express x 1 slot
  • PCI slot
  • 10 USB ports
  • 2 Serial COM ports
  • 3 SATA ports
  • CompactFlash socket
  • HD Audio support with S/PDIF I/O
All product specifications are subject to change without notice.

Product Availability

Samples of the ITOX CP100-NRM Mini-ITX motherboard are available now.

For ordering information and OEM volume pricing, please contact ITOX at sales@itox.com or call 888-200-4869 (732-390-2815 Outside USA).

About ITOX Applied Computing

Headquartered in East Brunswick, New Jersey, ITOX Applied Computing (www.itox.com) is the United States affiliate of ITOX-ACP. Founded in 1987, the company is recognized nationwide as a leading supplier of x86 embedded motherboards and SBCs for use in light industrial and special OEM environments including voice messaging, medical electronics, industrial control, security & surveillance, telecommunications, ATM/POS, digital signage, gaming and kiosk systems.  

As an independent ISO 9001:2000 registered firm, ITOX provides and supports both standard and custom-designed products ranging from ATX through Mini-ITX motherboards, small form factor SBCs, and COM modules. ITOX is committed to supporting customer requirements and continues to provide motherboards incorporating legacy ISA slots, along with PCI, PCI-X and PCI Express bus support.

Press Contact: Todd Shaner 732-390-2815, Ext. 6712, todds@itox.com

ITOX Applied Computing
8 Elkins Road
East Brunswick, NJ, 08816

tele: 732.390.2815
fax: 732.390.2817